Yamaha nRandom sequential tape-programming

nRandom sequential tape-programming

The unit will automatically program tracks in random sequential order for recording to tape.

	OPEN/CLOSE		DIMMER	TIME
	PROG	TAPE	CLEAR	PEAK
	SPACE	S/F		RANDOM	2
			REPEAT
	1	2	3	+10
	4	5	6
	7	8	9	0
4	SKIP		PAUSE	PLAY	3, 4
	SEARCH		INDEX	STOP
			– OUTPUT LEVEL +
		SYNCHRO
1 Follow steps 1 – 4 on page 15.			Notes
			•	Because the programmed data changes every time the
				RANDOM button is pressed, the amount of time remaining
2			•	at the end of the tape also changes accordingly.
				If the tape’s length is not enough, all tracks cannot be
				programmed. In this case, exchange the tape for a longer
RANDOM				one.
			•
				In step 2, you can check the program data for side A and
				side B.
					➀	➁
* The unit will automatically program tracks for side A and					PROGRAM
side B separately considering the tape’s total time.
					A	TOTAL
3 Begin recording on the tape deck and press the PLAY					1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
button on this unit at the same time.					➂	➃
4 The unit will pause at the end of side A of the tape.			➀ Shows the number of programmed tracks for each side in
				turn just after the automatic programming is finished, and
Turn the tape over to side B. Resume recording and, at				then it is replaced by the number of the first programmed
the same time, press the PLAY or PAUSE button on				track for side A.
this unit.			➁ Shows the total time of programmed tracks for each side.
			➂ Shows the side of the tape.
			➃ Shows the programmed track numbers for each side.
			• CD synchronized recording function can be used if your
				tape deck is compatible with it. In this case, in step 3 and 4,
				press the SYNCHRO button and then press the PLAY
				button on this unit’s remote control transmitter. Recording
				automatically begins. (For details, refer to page 19.)

17