Before using the timer
If you want to use the cassette deck,
Timer play and recording
By using the
NATURAL SOUND STEREO RECEIVER |
|
|
|
| |||
|
|
|
|
|
|
| VOLUME |
DISPLAY MEMORY | AUTO/MAN'L | PRESET/BAND |
| PRESET/TUNING |
| ||
|
|
|
|
|
| MIN | MAX |
TIME ADJ | TIMER |
| HOUR |
| PTY SELECT | MIN | INPUT |
STANDBY/ON PHONES |
|
| BASS | TREBLE | BALANCE |
| |
|
| - | + | - | + | L R |
|
USING THE
3.Timer REC
Select the recording component by turning INPUT. If you like to enjoy timer play with TUNER or AUX, select “REC Mode OFF”.
(Example)4.ON Time
“ON Time” appears on the display for a second, and changed to the time setting mode.
Press HOUR to set the hour. Press MIN to set the minute.
5.OFF Time
Set the time the same way as above.
If you set the ON time but not OFF time, the timer play or recording will finish automatically after an hour.
Notes
•The display mode will change in about 8 seconds. If the mode is changed before the setting is completed, call the mode again by pressing DISPLAY once or more.
•If you select the input other than TUNER and AUX on “2. Timer Input”, “3. Timer REC” is skipped.
English
1 Press DISPLAY. | 2 Press TIMER to complete the timer setting. |
Whenever DISPLAY is pressed, the display mode | |
changes as follows: | The system is put in the standby mode. |
| • The STANDBY and TIMER indicators light up. |
1. Clock Time (TIMER on/off mode) |
|
If you have not set the clock yet “Set Clock” | If you continue using the system, press STANDBY/ |
appears. You need to set the current time as | ON to turn on this unit. |
described on page 14. |
|
2.Timer Input
Select the source to be played by turning INPUT.
•Timer recording is possible only when you select TUNER or AUX.
To cancel the timer play setting
Press DISPLAY to show the current time, then press TIMER so that “TIMER” goes off from the display. You can also cancel by pressing TIMER in standby mode.
Note
•In the event of a power failure or when the AC power cord is disconnected for more than five minutes, you must reset the clock.