ADD KX-E100 AND/OR MDX-E100 TO YOUR SYSTEM

Before recording

When you record by using MDX-E100 or KX-E100, you must first make the connections as shown in “Connecting the system” on page 5. For details, refer to the instructions supplied with the MDX-E100 or KX-E100. A source from the component which is connected to the AUX terminal component can be recorded on a tape or MD.

2

•Only the first track is recorded. After recording the CD tray opens automatically.

3

Dubbing setting

There are six different combinations of components. Once you choose a certain mode, recording starts and ends automatically in a certain way for each mode.

MD REC

TAPE REC

TAPE

DUBBING

MODE

START

DUBBING

MODE

 

DUBBING

START

 

 

1Decide the combination of the components. Each time you press DUBBING MODE, the mode will change in the below order.

1

•Recording automatically starts from the beginning of the tape. (By pressing DUBBING START, the tape automatically rewinds to the beginning if it is in the middle.)

•When the recording on side A finishes while a track is being played back, the recording on side B starts from the beginning of the same track.

•The sound is automatically faded out when it gets close to the end of side B.

4

• Same as CD (Tr1) =TAPE

5

Play unitRecord unit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Same as CD =TAPE

6

Play unit Record unit

 

 

 

 

 

 

 

 

•Recording automatically starts at the beginning of the tape. (By pressing DUBBING START, the tape automatically rewinds to the beginning if it is in the middle.)

2Press DUBBING START to start recording.

Note

•The displays 1~6 which include the component you have not connected to your receiver (RX-E100) will be skipped.

E-24