Yamaha CL1, CL3, CL5

User settings

V1.7 Supplementary Manual

Added function for recovering from USB

overcurrent

Even if the connection with the USB device was stopped because an overcurrent condition occurred at

the USB port, it is now possible to reconnect the USB device without restarting.

Recovery procedure

After removing the cause of the overcurrent at the USB port, press the location that shows “USB

REMOUNT” at the FORMAT button of the SAVE/LOAD screen.

Contents

Main Contents SELECTED CHANNEL section Improved gain indication Improved HPF indication 1 2 Centralogic section Improved DCA group indication Input channels Additional head amp setting functions when changing the input patching 1 2 1. 2. 1. 2. Grouping and linking Improved display of DCA group / MUTE group names 1 Added functions for DCA groups 1 1 2 2 Improvements in channel link display 1. 2. 3. Monitor and Cue Extended cue functions 1. 2. Meters Graphic EQ, Effects, and Premium Rack INPUT PATCH Improvements in popup window operation Improved display for tap tempo function NOTE I/O device and external head amp Added display functions for device status CL series R-series Messages Improvements in I/O device settings User settings Added functions for the GAIN/PAN/ASSIGN knobs (assignable encoders) Custom fader bank settings CL3 console CL1 console Recall Store Recall Store Recall Store Page Page Added load/save functions Loading settings from a USB flash drive 2. 3. 4. 1 6. 7. 8. Saving the CL consoles settings on a USB flash drive 2 2. 3. 4. 5. 6. 9. 7. 8. Page Other functions Improvements to the channel name display Added channel color 1. 2. Added GPI functions 2. 3. Initializing the Dante audio network settings 1. 2. Block Diagram CASCADE IN MIX 1-24 CH 1-72{64,48} RECORDER INL/R CUE / MONITOR [PHONES] [SLOT] [2TR RECORDER] [DANTE OUT] (1-64) MONITOR L MONITOR R MONITOR MONO(C)