20
The Function Mode
The [FUNCTION] button provides access to a range of functions that give the
CLP-411/511 extraordinary versatility. The functions are categorized in groups
as follows:
CLP-411
CLP-511
F1 F1 Tuning............................................................. 21
F2 F2 Scale ............................................................... 21
F3 F3 Dual Mode Functions .................................... 22
–F4 Split Mode Functions .................................... 23
F4 F5 Metronome Functions ................................... 25
F5 F6 Left Pedal Mode ............................................. 25
–F7 Piano Song Part Cancel Volume.................. 25
F6 F8 MIDI Functions............................................... 26
–F9 Backup Functions.......................................... 29
To Select a Function …...........................................................................
ZPress the [FUNCTION] button so that its indicator lights.
NOTE
•Functions cannot be selected during demo/piano song playback or when
the recorder is in operation.
CLP-511
TRANSPOSE SPLIT
CLP-411
TRANSPOSEREVERB
HALL
2
STAGE
XUse the [<] and [>] buttons (i.e. the [TRANSPOSE] and [RE-
VERB] buttons on the CLP-411, or the [TRANSPOSE] and
[SPLIT] buttons on the CLP-511) to select the desired function: F1
through F9 on the CLP-511; F1 through F6 on the CLP-411.
CIn the case of the Dual Mode (F3), Split Mode (F4: CLP-511),
Metronome (F4: CLP-411, F5: CLP-511), MIDI (F6: CLP-411, F8:
CLP-511), and Backup (F9: CLP-511) functions, you will have to
press the [+/YES] button once to enter the respective sub-mode
after the function has been selected, and then use the [<] and [>]
buttons again to select the desired sub-function.
NOTE
•The Dual or Split (CLP-511) mode must be engaged before the F3 and
F4 functions can be selected, respectively. If the corresponding mode is
not engaged, “
F3.-
” or “
F4.-
” will appear on the display and the corre-
sponding sub-mode will not be available.
•The Dual mode can be engaged while in the Function mode, but the
Function mode must be exited before the Split mode (CLP-511) can be
engaged.
VSet the function as required by using the [–/NO] and [+/YES]
buttons (see the individual function descriptions, below).
BPress the [FUNCTION] button so that its indicator goes out to exit
from the function mode.
FUNCTION
● Operation Example
(sub-mode)
Press [+/YES]
Use [<], [>]
Use [–/NO], [+/YES]
Press [–/NO] or [+/YES]
once