62 CLP-990
Connections
The Clavinova’s [MASTER
VOLUME] slider setting
affects the input signal from
the AUX IN jacks, but the
[REVERB], [CHORUS], and
[BRILLIANCE] (page 32) set-
tings do not.
If you connect the Clavi-
nova to a monaural device,
use only the AUX IN [L/L+R]
jack or AUX OUT [L/L+R]
jack.
2AUX IN [R], [L/L+R] jacks
The stereo outputs from another instrument can be connected to these jacks,
allowing the sound of an external instrument to be reproduced via the Clavi-
nova’s speakers. Refer to the diagram below and use audio cables for connec-
tion.
CAUTION
When the Clavinova’s AUX IN jacks are connected to an external device, first
turn on the power to the external divice, then to the Clavinova. Reverse this order
when you turn the power off.
3AUX PEDAL jack
Connect an optional foot controller FC7 or foot switch FC4 or FC5 here.
Using the FC7 enables you to add expression to your performance by control-
ling the volume level of the notes you play. Using the FC4 or FC5 enables you
to turn the assigned function on and off. Use the AuxPedal parameter in the
“VOICE SETTING” menu. You can also assign the [START/PAUSE] button
function to this foot switch. (See page 89.)
4TO HOST jack
This jack allows direct connection to a personal computer. (Refer to “Con-
necting a personal computer” on page 63 for more information.)
5HOST SELECT switch
This switch should be set according to the type of connected MIDI device or
personal computer. (Refer to “Connecting a personal computer” on page 63
for more information.)
TIP
TIP
AUX IN
Tone Generator
AUX OUT (OUTPUT)
Clavinova
phone plug
(standard)
audio cable
Plug shape depends
on the divece.
AUX IN
L/L+RR