Yamaha CLP-990, CLP-990M - page 89

CLP-990 89
Other settings
This parameter enables you to set the speed of vibrato
when you select the Vibraphone voice and use a vibe
rotor pedal.
See the procedure on page 72.
Setting range:
1 - 10, Off
This parameter enables you to select whether the
sound is sustained while you press the keys on the key-
board (“PianoLike”) or the sound is sustained only
while you press and hold down the sustain pedal, like
playing a real vibraphone (“Normal”).
See the procedure on page 72.
Setting range:
PianoLike, Normal
Normal setting:
PianoLike
If you assign the START/PAUSE function to a pedal and turn
the function On, the pedal function assigned to the pedal in
the Voice Setting menu (pages 81 and 82) is disabled.
See the procedure on page 72.
Setting for:
Left, Middle, AUX
Setting range:
On/Off
Normal setting:
Off for all pedals
A pedal connected to the [AUX PEDAL] connector
may switch on and off differently. For example, some
pedals turn on the effects and others turn them off
when you press them.
Use this parameter to reverse this mechanism.
See the procedure on page 72.
Setting range:
Make, Break
Setting the speed of vibraphone’s
vibrato effect [VibraphoneRotor-
Speed]
Selecting a pedal function for
vibraphone
[VibraphonePedalMode]
A B
C D
NO YES
A B
C D
NO YES
Assigning the START/PAUSE func-
tion to a pedal [PedalStart/
Pause]
Selecting a type of auxiliary pedal
[AuxPedalType]
TIP
A B
C D
NO YES
Select a pedal to assign the function. Set to On or Off.
A B
C D
NO YES