Yamaha CRW-F1SX manual Prepare a thin pin-like object, such as a straightened paper clip

Loading/Ejecting a Disc

Manually Ejecting a Disc

If the disc tray fails to open for some reason, such as a power failure, follow the steps below to remove the disc from the drive.

Note

Frequent use of this operation may cause malfunction of the drive.

1 Prepare a thin pin-like object, such as a straightened paper clip.

Use an object less than 2 mm in diameter and more than 3 cm in length.

2 Turn off the CRW-F1SX drive.

3 Insert the thin pin-like object straight into the manual eject hole, and push it in.

When the disc tray opens, remove the disc.

Manual eject hole

4 Turn on the CRW-F1SX drive, and close the disc tray.

25