Appendix | Yamaha CRW2200IX specification

Appendix

Notes on Connecting IEEE1394 Devices

Remember the following notes when connecting the CRW2200IX drive to the host computer along with other IEEE1394 devices.

●For optimum performance when writing a CD, connect the CRW2200IX drive directly or solely to the host computer.

●Do not connect or disconnect any IEEE1394 devices while the CRW2200IX drive is in operation (especially when writing to a disc).

●If there is a slower device connected between the host computer and the CRW2200IX drive, the data transfer between the CRW2200IX drive and the host computer will be slowed, which may cause a failure in writing a CD.

●The IEEE1394 ports on the CRW2200IX drive have 6-pin connectors, but do not supply power (IEEE1394 bus power).

●Do not turn off the CRW2200IX drive while its IEEE1394-connected computer is turned on. Otherwise, it may cause malfunctions on your computer or other IEEE1394 devices connected together, depending on the specifications of the IEEE1394 interface card (host adapter) or the writing software you are using on the computer.

●Avoid creating a looped connection that sends data output from a device back to the same device. The illustration below shows an example of such a loop (at the host computer).

29

Image 37

Yamaha CRW2200IX manual Appendix

Contents

Page FCC Information U.S.A Achtung English Safety Precautions Iii About handling CD-R/RW discs Precautions for TransportationCopyrights Table of Contents Introduction Features of the CRW2200IX Drive CD Text support High-fidelity digital audioAbout IEEE1394 Yamaha Buffer Underrun Protection Buffer Underrun Defined System Requirements Before UseWindows Users CD Writing Software Macintosh UsersHard Drive Space Operating System CD-R discs*1 Supported DiscsCD-RW discs*2 High Speed CD-RW discs*3 About Partial CAV Constant Angular Velocity About CD-ROMs Serial No Serial Number Front Panel Front and Rear of Unit ➂ DC-IN connector ➁ Power switch STANDBY/ONRear Panel ➀ Line OUT jacks L/R Windows Users Setup Procedures Macintosh Users Connecting Set Up the CRW2200IX Drive Install the CD Writing Software Electrical plugs/sockets vary according to country/region LED Turn on the CRW2200IX drive Connection to a PC notebook computer via CardBus card Connection to a PC desktop or tower type computer Rear panel Connection to a Macintosh computer For Windows 98 Second Edition/Me Configuring for the Operating System You can also check the FireWire version in this window Connecting Devices Connecting and Disconnecting IEEE1394 DevicesDisconnecting Devices Operation Ejecting a Disc Loading a Disc Ejecting a Disc in an Emergency Yamaha CD-R/RW Drive web site TroubleshootingDrive does not turn on Computer does not start up Disc keeps being ejected Disc tray does not open Disc is not loaded Setting of the Windows Media Player Properties setting of the CRW2200IX driveNo sound of CD-DA audio CD disc is audible Buffer Underrun error message is displayed Other symptomsUnstable operations Connecting in a daisy-chain Connecting Multiple IEEE1394 Peripherals TogetherConnecting in a tree Appendix Appendix Disc-at-Once DAO Writing ModesTrack-at-Once TAO Packet Writing Session-at-Once SAO Determining the Firmware Version of the CRW2200IX drive About the FirmwareFor Macintosh Status Indicator Messages LED Color LED Indicator Messages Supported Formats CRW2200IX Specifications Two 6-pin connectors power not supplied to connectors ports AC adapter CRW2200IX series complies with the following specifications Index Symbols Yamaha CD-R/RW Drive web site Russia EUROPE, Eastern Europe