Operation

You can load and eject a disc (as described below) only when the CRW2200IX drive is turned on.

Loading a Disc

1

2

1Open the disc tray by pressing the eject button on the CRW2200IX drive’s front panel.

2Place the disc onto the disc tray with its label or printing facing upward.

3Close the disc tray by pressing the eject button again. You can also gently push it closed.

Load or unload the disc after the disc tray has fully opened. Do not push or pull the disc tray using excessive force. Doing so can damage the drive or the disc.

Ejecting a Disc

1

2

1Open the disc tray by pressing the eject button on the CRW2200IX drive’s front panel.

2Remove the disc from the disc tray.

3Close the disc tray by pressing the eject button again. You can also gently push it closed.

21

Page 29
Image 29
Yamaha CRW2200IX manual Loading a Disc, Ejecting a Disc