Chapter 2 - Installing the Yamaha CRW4261t Drive

AUDIO cable

To the CRW4261t 4-pin connector (large)

To the CDR100/102

(3-pin connector)

* Simultaneous use with the CRW4261t is is not possible.

To the Sound Card (Sound Blaster compatible) 4-pin connector (small)

8.Connect the power supply cable.

Connect the +12V and +5V 4-pin power cable to the power supply interface located on the rear panel of the CRW4261t drive.

The shape of the connector makes it impossible to reverse the connec- tions.

If you have difficulty when inserting the connector, try wiggling the connector left and right while inserting it.

IDE

D

INTERFACE

 

C

CONNECTOR+5V

1

 

 

 

CSEL

 

 

SLAVE

 

T

MASTER

IO OU

 

AUD

L

 

R G

 

 

 

 

T

INPU

G

+12V

10