Troubleshooting
If CRW4261t is not performing as expected, look up the symptoms in the following table, and take the appropriate corrective action.
Symptoms | Corrective action |
The power to the CRW4261t is off | • Check the DC power cable connection. |
|
|
The CRW4261t is not recognized by | • Check the IDE interface connector connection. |
the computer | • Is the MASTER/SLAVE setting correct? |
| • If there is only one device connected to the IDE |
| interface connector, is it connected to the end of |
| the connector? |
|
|
The disc tray will not open | • Make sure that the power to the drive is turned |
| on. |
|
|
The disc ejects | • Make sure that the disc is seated in the tray cor- |
| rectly. |
|
|
Incorrect operation | • Make sure that the disc is seated in the tray cor- |
| rectly. |
| • Make sure that you are using the correct disc. |
| • Make sure that there is no dust, dirt, or conden- |
| sation on the disc or tray. |
|
|
16