Yamaha CRW4416S Tools, Discs

Chapter 1 - System Configuration

Phillips screwdriver

This is used to remove the cover of your computer,

and to install the Yamaha CRW4416S drive.

Long nose pliers

These are used to insert or remove the jumper pin when setting the SCSI ID and parity settings etc.of the Yamaha CRW4416S drive.

Phillips Screwdriver

Long nose pliers

■CD-R discs

Please use discs that are compliant with Orange Book Part 2.

(If you wish to write data at 4X speed, you must use discs which sup- port high-speed writing.)

■CD-RW discs

Please use discs that are compliant with Orange Book Part 3.

(If you wish to write data at 4X speed, you must use discs which sup- port 4X speed writing.)

Yamaha recommends the following Yamaha CD-RW discs:

•CRWM74B4X (φ120mm, 74 minutes)

•CRWM74R4X (φ120mm, 74 minutes)

■Read-only Discs

You can use discs with the logo which conform to the Compact Disc Read Only Memory standard (CD-ROM standard, Yellow Book).

If you wish to use the audio functions, use discs with the logo, which conform to the Compact Disc Digital Audio standard (Red Book).