Chapter 1 - System Configuration

Chapter 1 - System Configuration

Before using the CRW4416S, make sure that you have all of the items on the list of included items.

In order to use the CRW4416S, you will require the following.

Computer

The following operating environment is required:

•An IBM/AT compatible computer with a 100 MHz or faster Pentium CPU (in order to write at 4x speed)

•A vacant slot in which to install a SCSI card or a pre-installed SCSI card

•A vacant half-height bay

•Windows 95, Windows 98 or Windows NT4.0(Service Pack 3)

•Sufficient hard disk space

Note: If you wish to create an image file and write it to a CD-R or CD-RW, you will need approximately 750 MB of free space on your hard disk as work area.

SCSI card

This is required in order to connect a SCSI device (the Yamaha

CRW4416S) to your computer.

We recommend the following :

Adaptec SCSI cards: AHA-2940 (PCI), AHA-154x (ISA)

Software

Use writing software or packet writing software which supports the

CRW4416S.

For software-related questions, please read the owner’s manual for your software.

3