Yamaha CRW4416S manual 13

Chapter 2 - Installing the Yamaha CRW4416S Drive

■Terminator setting

The terminator setting indicates whether or not this device is the last connected SCSI device.

Terminator ON (with a jumper)

—Use this setting if the CRW4416S is the last device in the internal SCSI daisy-chain.

Terminator OFF (without a jumper)

—Use this setting if devices other than the CRW4416S are in the internal SCSI daisy-chain and the CRW4416S is not the last device.

Terminator ON (default)			Terminator OFF
		ID SELECT			ID SELECT
		PARITY			PARITY
		TERMINATOR			TERMINATOR
	1 2 4	BLOCK SIZE		1 2 4	BLOCK SIZE

*Use jumper connectors to short the locations shown in black.

■Block size setting

Block size ON (with a jumper)

—Block Size is set to 512Byte/sector. This function is valid only for workstations, such as those that run UNIX.

Block size OFF (without a jumper)

—Normally, use this setting.

Block size ON			Block size OFF (default)
		ID SELECT			ID SELECT
		PARITY			PARITY
		TERMINATOR			TERMINATOR
	1 2 4	BLOCK SIZE		1 2 4	BLOCK SIZE

* Use jumper connectors to short the locations shown in black.

7