Setup Flowchart

24X: 3,600 KB/sec

 

These flowcharts show the procedure for setting up the CRW8824SX drive. For easy cross-referencing, the relevant pages in this manual are also given.

Windows Users

STEP

Do you have a SCSI adapter

STEP

Obtain a SCSI adapter card

 

1-1

Recommended models:

1 card?

NO

Adaptec AHA-2940-series (PCI)

 

YES

STEP Check that the SCSI adapter 2 card is recognized correctly

Go to Control Panel System Device Manager tab. Double-click on SCSI controllers to check that the adapter card is recognized correctly by the computer’s OS.

STEP

1-2

Install the SCSI adapter card

Read this manual and insert the SCSI card into the appropriate PCI slot on the computer.

STEP

3

STEP

4

Set up the CRW8824SX drive

1.Set the switches at the rear of the drive. (P.10, 11)

2.Connect the SCSI and power cables, then switch the drive on. (P.16-18)

Check that the CRW8824SX drive is recognized correctly (P.20)

Go to Control Panel System Device Manager tab. Double-click on CDROM to check that the drive is recognized correctly by the computer’s OS.

STEP Install the CD writing software

5

For details about how to install the

software, refer to the documentation that

came with it.

STEP

6

Start using the CRW8824SX drive!

Use the drive to create audio CDs, to back up data on your hard disk, or for whatever purpose suits your needs.

1