Front and Rear of Unit

Rear Panel

The CRW8824SX drive’s rear panel features the following:

SCSI connectors Connect either of these to your computer’s SCSI adapter card using the SCSI cable. The other connector can be used as a pass-through when daisy- chaining more SCSI devices to it. It can be left vacant if your drive is the last device on the SCSI chain and is terminated. (P.18)

LINE OUT connectors To listen to audio CDs with your drive, connect these to the line-level input (LINE IN) of your stereo equipment using a standard stereo phono cable (sold separately).

Power connector Connect the included power cable here. (P.18)

SCSI

SCSI

 

LINE OUT

CDR ID

R

L

TERMINATOR

AC IN

 

 

1

 

OFF ON

SER. NO. ❋❋❋❋❋❋❋❋ st2

CDR ID selector switch The drive’s SCSI ID number is shown in the switch’s window. Press the button above the window to decrement the SCSI ID number, or the button below the window to increment it. (P.10)

TERMINATOR switch This enables the drive’s built-in SCSI termination. Switch this to “ON” if your drive is the last device on the SCSI chain. Otherwise, switch it to “OFF.” (P.11)

Serial number

This consists of 3 letters and 7 digits. You may need to refer to this number when requesting User Support services.

9