Operation

This section explains how to operate the CRW8824SX drive after you have installed it.

Loading a Disc

12

1Press the Eject button on the CRW8824SX drive’s front panel.

2Place the disc onto the tray with its label or printing facing upward.

3Press the Eject button to close the tray.

nWhen a disc is loaded, the ON/DISC LED is lit up in orange first, then changes to green. For more details, refer to page 30.

nDo not push or pull the tray using excessive force. Doing so can damage the drive or the disc. Instead, always use the Eject button to open or close the tray.

Ejecting the Disc

12

1Press the Eject button on the CRW8824SX drive’s front panel.

2Remove the disc from the tray.

3Press the Eject button to close the tray.

nIt may not be possible to eject the disc tray while a disc is being read or in other situations, depending on the SCSI command.

nOnly remove the disc after the disc tray has opened fully. Otherwise, you risk damaging the drive or the disc.

22