139
CVP-202
137
■ Registration & Setup Files ........................................................................
You can use the functions on this page to load, save, delete, and re-
name data files containing registration data (page 89) or panel setup data.
Before executing one of these functions, make sure that the disk you
want to use for this operation is inserted in the disk drive.
Disk
FUNCTION [DISK 1] Display — page 4
ZSelect the file type.
Press either of the two leftmost LCD buttons to select the file type to
be loaded, saved, deleted or named.
REGISTRATION
A Registration file may contain the data for just one
registration, or a full set of twenty. Refer to page 11 in
the Data List for a list of settings registered by the
Registration function.
ALL SETUP An All Setup file contains all panel setting data in the
list on page 11 in the Data List.
➾If you select REGISTRATION as the file type, you can also use the
REGIST function to specify whether the operation will affect one
memory location or a full set of twenty.
When saving registration data, the REGIST setting specifies which
memory location(s) will be saved to disk. When loading data, the
REGIST setting specifies how the registration data will be loaded, as
shown below:
You can delete or rename any registra-
tion file on the disk, regardless of the
REGIST setting.
REGIST setting:
File contains: ALL A1 — E4
All
registrations All registrations are loaded.
Only registration saved from
specified location is reloaded
(to original location).
One
registration Selected registration file is
loaded into original location.
Selected registration file is
loaded into specified location.