140 CVP-202
XSelect the file operation.
File operations cannot be performed
while the [SONG] lamp is lit. Exit the
Song mode before attempting to
perform a file function.
Use the second LCD button from the right to select the desired file opera-
tion: LOAD, SAVE, DELETE or NAME.
CPress the START button.
➔The file operation begins.
The subsequent steps for each file operation depend on the operation
you’ve selected. Refer to the corresponding instructions for each opera-
tion below.
■ LOAD.........................................................................................................................................
When you select LOAD, the Load function display will appear. The origi-
nal internal data will be replaced when you execute the Load operation. Be
sure to save all important data to disk (see below) before using the Load op-
eration.
138
Disk
First, select the desired file to be loaded. Press either of the two leftmost
LCD buttons to select the file, then press the OK button.
➔An “Are you sure?” message is displayed. Press the YES button to load
the selected file, or the NO button to abort the Load operation.
■ SAVE..........................................................................................................................................
When you select SAVE, the name entry function display for the file to be
saved will appear.
Press the > button to move the underline cursor, and select the character
position of the file name. (File names can contain up to twelve characters.)
➾Use the data dial or [–] and [+] buttons to highlight the characters to be
input.