Making Global and Other Important Settings — Function
127
CVP-205/203
The explanations here apply to step #3 of the procedure on page 125.

Tuning the Overall Pitch Master Tune

Selecting a Scale Scale Tune

Fine Tuning the Pitch/Selecting a Scale — Master Tune/Scale Tune
Hz (Hertz)
This unit of measurement
refers to the frequency of a
sound, and represents the
number of times a sound
wave vibrates in a second.
n
The Tune function does not
affect the Drum Kit or SFX
Kit voices.
Determines the overall pitch of the CVP-205/
203, from 414.8 - 466.8 Hz. Press the 4 or 5
[▲▼] buttons simultaneously to instantly reset
the value to the factory setting of 440.0 Hz.
Determines the Scale (page 128).
Determines the note to be tuned and the amount of tuning.
The tuning range is from -64 through 0 to +63. Each increment
equals one cent (one cent is one hundredth of a semitone).
Determines the ne tuning of the selected note in 1-
cent steps. Press the 5 or 6 [▲▼] buttons
simultaneously to instantly reset the value to the
factory setting.
Determines the base note for each
scale.
When the base note is changed, the
pitch of the keyboard is transposed, yet
maintains the original pitch relationship
between the notes.
The current tuning of each note is shown above or
below the corresponding key. Cent
A unit of pitch equal to 1/100
of a semitone (100 cents = 1
semitone).
n
You can register your origi-
nal scale tunings to a REG-
ISTRATION MEMORY
button. To do this, check-
mark SCALE in the REG-
ISTRATION MEMORY
display (page 85).