Adjust the Volume Balance and Changing Voices
— Mixing Console
CVP-205/203
124
Effect Structure
The CVP-205/203 features the following digital effect systems, which can be applied independently for the Natural
voices (page 89) and the Regular voices (page 89). The effect type, depth, and various parameters can be set with the
panel controls.
Reverb.......... Normally the settings that fit the selected style are called up. For most of the Natural voices, settings
that fit the voice are called up.
Chorus.......... Normally the settings that fit the selected style are called up. For most of the Natural voices, settings
that fit the voice are called up.
DSP ..............Normally the settings which fit the selected voice are called up. Variation (settings in which the
expression of the effect is changed) is prepared for each type, and it can be turned ON/OFF by the
[VARIATION] button on the panel.
When the Natural voice is selected, the [VARIATION] button does not work.
The illustration below shows how the various effect blocks are set up and traces the signal flow for the send/return
controls set on the CVP-205/203.
For Natural Voices (REVERB2, CHORUS2, DSP2)
For Regular Voices (REVERB1, CHORUS1, DSP1)
OUT
Rev Send
MAIN VOICE
Dry
Cho Send
DSP Send
When DSP is set as an Insertion effect
(here, PART is set to MAIN),
it is put here in the signal flow.
(For Natural voices,
DSP can only be used
as a System effect.)
Rev Send
LAYER VOICE
Dry
Cho Send
DSP Send
Rev Send
LEFT VOICE
Dry
Cho Send
DSP Send
Rev Send
MIC
(CVP-205 only)
Dry
Cho Send
DSP Send
Rev Send
Dry
Cho Send
DSP Send
CHORUS BRILLIANCE
REVERB
DRY LINE
DSP
Chorus
Return
DSP
Return
Reverb
Return
DSP
When DSP is set as a System effect,
it is put here in the signal flow.
(For Natural voices, DSP can only
be used as a System effect.)
(CVP-205 Natural Voices only)
STYLE/SONG
(each channel)