Basic Operations — Organizing Your Data
41
CVP-205/203
Select a file shown in the display. In this example, we’ll select a voice file.
First, press the VOICE [PIANO & HARPSI] button to call up the display containing the files.
This display (“Open/Save” display) is typical of those used to call up and store files (voice files).
The CVP-205/203 already contains a variety of voices in the PRESET section. You can store your own original voices
created with the Sound Creator function to the USER or FLOPPY DISK section.
Selecting Files and Folders
BACK NEXT
ENTER
DATA
ENTRY
END
1Select “PRESET,” “USER,” or
“FLOPPY DISK” by using the
[BACK][NEXT] button.
2Use the [1▲] ~ [7▲] buttons to
turn the pages.
When the amount of available files or
folders exceeds ten, the bottom of the
display changes as shown below.
Press Next
Press Prev.(previous)
3Select the file/folder.
There are two ways to select the file/
folder:
•Press the [A] - [J] button.
Press the letter button
corresponding to the file/folder you
wish to call up. (In the example
display shown above, the voice files
are shown.)
•Use the [DATA ENTRY] dial and
the [ENTER] button.
When you turn the [DATA ENTRY]
dial, the highlight moves among the
available files/folders. Highlight the
desired file or folder (voice files are
shown in the example above) and
press the [ENTER] button to call up
the selected item.
Double-clicking the
appropriate [A] -[J] button
calls up the corresponding
file and returns to the MAIN
display.
Highlighting the desired file
and double-clicking the
[ENTER] button calls up the
corresponding file and
returns to the MAIN display.
Press the [EXIT] button to go back to the MAIN display.
You can go back to the previous display by pressing the [EXIT] button.
When “JAPANESE” is
selected for the Language
parameter (pages 50, 143),
and you change this to one of
the western languages, the
kanji and kana characters of
the file name stored in the disk
drive are changed to western
characters. In the opposite
case, special Latin characters
and marks are changed into
normal characters. Also, in the
case of floppy disk data, text
in the files are changed to
characters that cannot be
read by the instrument.
Keep in mind that similar prob-
lems may occur when trying to
access files originating or
edited by a computer having a
different language operating
system. In general, be careful
when switching languages —
you risk not being able to
access the data properly.
Exiting from small pop-up windows
You can also exit from small pop-up
windows (such as in the illustration
below) by pressing the [EXIT] button.