Using Headphones
CVP-405/403/401 Owner’s Manual 17
Introduction
Using Headphones
Connect a pair of headphones to one of the [PHONES] jacks located on the bottom
left of the instrument.
Two sets of standard stereo headphones can be connected. (If you are using only
one pair of headphones, you can plug them into either of these jacks.)

Using the Headphone Hanger

A headphone hanger is included in the instrument package so that you can hang the
headphones on the instrument. Install the headphone hanger using included two screws
(4 x 10mm) as shown in the figure.
MIN MAX
INPUT MIC. MIC.LINE PHONES
VOLUME LINE IN
CVP-405/403
CVP-401
CVP-405/403
CVP-401
CAUTION
Do not listen with the head-
phones at high volume for
long periods of time. Doing
so may cause hearing loss.
CAUTION
Do not hang anything other
than the headphones on the
hanger. Otherwise, the instru-
ment or the hanger may be
damaged.
Outputting sound from the speaker while headphones are con-
nected
1Call up the operation display.
[FUNCTION] [J] UTILITY TAB[
][
®
] CONFIG 2
2Press the [3
ππ
ππ
]/[4
ππ
ππ
] (SPEAKER) button to select “ON.”
Outputting sound only from the headphones
From the display called up in step 1 above, press the [3
ππ
ππ
]/[4
ππ
ππ
]
(SPEAKER) button to select “OFF.”
When “OFF” is selected, the speakers will not sound and you can only hear
the instrument sound via the headphones.