Quick Guide
CVP-405/403/401 Owner’s Manual 31

Adjusting the Tempo or Setting the Time Signature of the Metronome Sound

■Adjusting the Metronome Tempo

1Press the TEMPO [–]/[+] button to call up the pop-up tempo setting display.
2Press the TEMPO [–]/[+] buttons to set the tempo.
Pressing and holding either button lets you continuously increase or decrease the value.
You can also use the [DATA ENTRY] dial to adjust the value. To reset the tempo, press the TEMPO [–]/[+] but-
tons simultaneously.
nAbout the Tempo display
The number in the display indicates how many quarter-note beats there are in one minute. The range is between 5 and
500. The higher the value, the faster the tempo.
3Press the [EXIT] button to close the Tempo display.

■Determine the Metronome Time Signature and Other Settings

1Call up the operation display:
[FUNCTION] → [J] UTILITY → TAB [
√
] CONFIG 1 → [B] 2 METRONOME
2
Set the parameters by pressing the [2
ππ
ππ††
††
]–[7
ππ
ππ††
††
] buttons.
VOLUME Determines the level of the metronome sound.
SOUND
Determines which sound is used for the metronome.
Bell Off...............Conventional metronome
sound, with no bell.
Bell On...............Conventional metronome
sound, with bell.
English Voice......Count in English
German Voice....Count in German
Japanese Voice...Count in Japanese
French Voice.......Count in French
Spanish Voice.....Count in Spanish
TIME
SIGNATURE
Determines the time signature of the metronome
sound.
Set the Popup Display Time
1Call up the operation display.
[FUNCTION] → [J] UTILITY → TAB [
√
][
®
] CONFIG 2
2Select the [B] (2 POPUP DISPLAY TIME) button, and use the [7
π†
]/[8
π†
] buttons to set the time.