To Clear a Learned Function

To Clear All Learned Functions

1

Set to the “USER” position.

2 Press and hold the CLEAR button using the point of a mechanical pencil, etc.

CLEAR

3 Press and hold the key where the learned function to be deleted is until the indicator flashes 3 times.

To clear two or more functions, repeat step 2 and 3.

Note

If a key is not pressed soon after the CLEAR button is pressed, this unit will automatically return to the status that was in effect before the CLEAR button was pressed.

1

Set to the “LEARN” position.

2 Press and hold the CLEAR button using the point of a mechanical pencil, etc.

CLEAR

3 Press and hold any key until the indicator flashes 7 times.

SPECIFICATIONS

<CX-1>

Input Sensitivity/Impedance

PHONO MM ..................

2.5 mV/47 k-ohms

PHONO MC

 

.......................100 µV/220 ohms, 1 k-ohms

CD/TUNER/TAPE/AUX

 

......................................

150 mV/47 k-ohms

Input Sensitivity (New IHF)

PHONO MM ..................................

0.83 mV

PHONO MC.......................................

33 µV

CD/TUNER/TAPE/AUX......................

50 mV

Maximum Input Signal (1 kHz, 0.05% THD)

PHONO MM ...................................

150 mV

PHONO MC........................................

6 mV

Output Level/Impedance

 

REC OUT .......................

150 mV/2.5 k-ohms

PRE OUT ................................

1.5V/47 ohms

Maximum Voltage Output

 

(20 Hz to 20 kHz, 1% THD)

 

PRE OUT ...............................................

8V

16

Headphone Jack Rated Output/Impedance

Output Level (100 ohms)

.....................4.5V

Impedance ....................................

68 ohms

Frequency Response (20 Hz to 20 kHz)

CD/TUNER/TAPE/AUX .................

0±0.2 dB

RIAA Equalization Deviation (20 Hz to 20 kHz)

PHONO MM ...................................

±0.2 dB

PHONO MC ...................................

±0.2 dB

Total Harmonic Distortion (20 Hz to 20 kHz)

PHONO MM to REC OUT (3V) ......

0.002%

PHONO MC to REC OUT (3V).......

0.003%

CD/TUNER/TAPE/AUX to PRE OUT (3V)

........................................................

0.002%

Signal-to-Noise Ratio (IHF-A Network)

PHONO MM (5 mV Input Shorted)

 

.........................................................

95 dB

PHONO MC (500 µV Input Shorted)

.........................................................

90 dB

CD (Input Shorted) .........................

110 dB

TUNER/TAPE/AUX (Input Shorted)

 

.......................................................

107 dB

(109 dB for TAPE 3 only)

Residual Noise (IHF-A Network) ...........

1.0 ∝V

Channel Separation (Vol. –30 dB) PHONO MM/MC (Input Shorted

1 kHz/10 kHz) .........................

 

80 dB/70 dB

CD/TUNER/TAPE/AUX (Input 5.1 k-ohms

Terminated 1 kHz/10 kHz)

......

85 dB/65 dB

Tone Control Characteristics

 

 

BASS:

 

 

 

Boost/cut ............................

±10 dB (20 Hz)

Turnover Frequency ........................

 

350 Hz

TREBLE:

 

 

 

Boost/cut ..........................

±10 dB (20 kHz)

Turnover Frequency .......................

 

3.5 kHz

Filter Characteristics

 

 

 

SUBSONIC FILTER .........

15 Hz, –18 dB/oct

Audio Muting ........................................

 

–20 dB

Gain Tracking Error (0 to –60 dB)

............2 dB