Yamaha CX-1, CX-2 (For Europe model only), STANDBY mode, For Other Component Control, For Control of This Unit, PLAY, Note, PAUSE, DIR A, DIR A, POWER, POWER, ➎POWER, VOLUME

For Other Component Control For Control of This Unit

Identify the remote control transmitter keys with your component’s keys. If these keys are identical, their function will be the same. On each key function, refer to the corresponding instruction on your component’s manual.

➊Tuner keys Controls tuner

+: Selects higher preset station number.

–: Selects lower preset station number.

A/B/C/D/E Selects the page (A – E) of preset station buttons.

➋CD player keys

Controls compact disc player.

*DISC SKIP is applicable only to compact disc changer.

➌LD player keys (U.S.A., Canada and General models of CX-2 only)

Controls LD player.

*There are some models which have a key with both the functions of PLAY and PAUSE.

➍Tape deck keys Controls tape deck.

*DIR A, B and DECK A/B are applicable only to double cassette tape deck.

*For a single cassette deck with automatic reverse function, pressing DIR A will reverse the direction of tape running.

➎POWER

Turns the power on/off.

➏Input selector keys Selects input source.➐MUTING

When pressed, mutes the volume level. To resume original volume level, press this again.

While muting, the indicator above the VOLUME control on the front panel illuminates.

➑VOLUME +/–

Turns the volume level up/down.

STANDBY mode

(For Europe model only)

While the power is on, pressing the POWER key on the remote control transmitter switches the unit to the STANDBY mode. (In this mode, the indicator is half illuminated.)

Note

To turn the power off completely, disconnect the AC power plug from the wall outlet.

POWER POWER

POWER on mode STANDBY mode

13