112 DGX-530/YPG-535 Owner’s Manual
Accessory CD-ROM Installation Guide
Troubleshooting
• Is the USB cable connected corr ectly?
Check the USB cable connection. Disconnect the
USB cable, then connect it again.
• Is the USB function enabled on y our com-
puter?
When you connect the instrument to the
computer for the first time, if the “Add New
Hardware Wizard” does not appear, the USB
function on the computer may be disabled.
Perform the following steps.
1Select [Control Panel]* [System]
[Hardware] [Device Manager] (for Win-
dows 2000/XP, or select [Control Panel]
[Device Manager] (for Windows Vista).
* Classic View only in Windows XP.
2Make sure that no “!” or “x” marks appear
at “Universal serial bus controller” or
“USB Root Hub”. If you see an “!” or “x”
mark, the USB controller is disabled.
• Is any unknown device registered?
If driver installation fails, the instrument will be
marked as an “Unknown device”, and you will
not be able to install the driver. Delete the
“Unknown device” by following the steps below.
1Select [Control Panel]* [System]
[Hardware] [Device Manager] (for Win-
dows 2000/XP, or select [Control Panel]
[Device Manager] (for Windows Vista.)
* Classic View only in Windows XP.
2Look for “Other devices” in the menu
“View devices by type”.
3If you find “Other devices”, double-click it
to extend the tree to look for “Unknown
device”. If one appears, select it and click
the [Remove] button.
4Remove the USB cable from the instru-
ment, and make the connection again.
5Install the driver again.
• Windows 2000 users..... see page 110
• Windows XP users........ see page 110
• Windows Vista users.... see page 111
Did you install the driver? (page 109)
• Is the USB cable connected corr ectly?
•Are the volume settings of the instrument,
playback device, and application program set
to the appropriate levels?
•Have you selected an appropriate port in the
sequence software?
•Are you using the latest USB-MIDI driver?
The latest driver can be downloaded from the
following web site.
http://music.yamaha.com/download/
• Does your computer satisfy the system
requirements?
• Is any other application or de vice driver run-
ning?
• Do not suspend the computer while the MIDI
application is running.
You may not be able to suspend/resume
normally, depending on the particular
environment (USB Host Controller, etc.). Even
so, simply disconnecting and connecting the
USB cable will allow you to use the instrument
functions again.
[Windows 2000/XP/Vista]
1Start the computer and use the “Adminis-
trator” account to log on Windows.
Close all applications and windows that are
open.
2Insert the included CD-ROM into the CD-
ROM drive.
3Select “My Computer” from the Start
menu.
4Right-click the CD-ROM icon and select
“Open” from the pop-up menu.

5

Select “USBdrvVista_” or “USBdrv2k_”
folder “uninstall” folder “uninstall.exe”
file and launch “uninstall.exe.” file.
Follow the on-screen instructions to uninstall
the driver.
The driver cannot be installed.

When controlling the instrument from your

computer via USB, the instrument does not

operate correctly or no sound is heard.

Playback response is delayed.
Cannot suspend or resume the com-
puter correctly.
How can I remove the driver?