The Metronome
DGX-530/YPG-535 Owner’s Manual 23
In this example we’ll set up a 5/8 time signature.
1Press and hold the [METRONOME ON/OFF] button for
longer than a second to select the function “Time Signa-
ture–Numerator”.
2Use the dial to select the number of beats per measure.
A chime will sound on the first beat of each measure while the other
beats will click. All beats will simply click with no chime at the begin-
ning of each measure if you set this parameter to “00”.
The available range is from 0 through 60. Select 5 for this example.
3Press the CATEGORY [ ] and [ ] buttons as many times
as necessary to select the beat length function “Time Sig-
nature–Denominator”.
4Use the dial to select the beat length.
Select the required length for each beat: 2, 4, 8, or 16 (half note, quarter
note, eighth note, or 16th note). Select 8 for this example.

Setting the Number of Beats per Measure, and the Length of Each Beat

Hold for longer
than a second
Denominator
(The length of
one beat.)
Numerator
(Number of
beats per
measure.)
• The metronome time signature
will synchronize to a style or
song that is playing, so these
parameters cannot be changed
while a style or song is playing.
NOTE

f

r