SET MENU Items

3. L/R BALANCE
3 L/R BALANCE

Use this feature to adjust the balance of the output level from the right and left main

speakers. Initial setting is the neutral position.

 

LR

0

3 L

R

 

 

 

0

4. HP TONE CTRL (Headphone Tone Control)
4 HP TONE CTRL

 

 

Use this feature to adjust the level of bass and treble when you use your headphones.

 

 

The initial Setting is 0 dB for both bass and treble.

 

__________

4 HP TONE

BASS

BASS

0dB

 

TRBL

Select BASS or TRBL and press + or –to change each level. You can adjust

 

---------+

 

 

 

0dB

4 HP TONE

the level from –6 dB to +3 dB.

 

 

 

 

TRBL

0dB

 

5. CENTER GEQ (Center Graphic Equalizer)

5 CENTER GEQ

 

 

Use this feature to adjust the built-in five band graphic equalizer so the Center speaker

 

 

tone matches that of the left and right Main speakers. You can select the 100 Hz, 300

_________

 

￿￿ 100Hz

 

 

Hz, 1 kHz, 3 kHz, or 10 kHz frequencies.

300Hz

 

5 CENTER

1kHz

 

 

 

100Hz

 

3kHz

 

1 Use g to select a higher frequency and h to select a lower frequency.

10kHz

 

 

-

-------

+

 

 

 

 

 

2Press + or –to adjust the level of that frequency.

Note:

•You can monitor the Center speaker sound while adjusting this item using the Dolby Surround test tone generator. Press TEST before starting the procedure above. “TEST DOLBY SUR.” appears, and the test tone starts alternating among the speakers. Once you begin the procedure above, the test tone remains at the Center speaker and you can hear how the sound changes as you adjust the various frequency levels. To turn off the test tone generator, press TEST repeatedly until the current DSP program appears.

6. INPUT RENAME

6 INPUT

RENAME

 

VCR1 ->

VCR1

 

 

--------

VCR1 -> VCR1

 

 

 

 

--------

 

 

 

Use this feature to change the name of the input which appears on the OSD or the front panel display.

1Select the input you want to change the name of by pressing an input button (or using the INPUT selector).

2Press + or –to blink the underbar for the space or character you want to edit.

3Press h or g to select the character you want to use and + or –to move to the next one.

•Press g to change the character in the following order, or press h to go in the reverse order.

A~Z, a space, 0~9, a space, a~z, a space, #, *, +, and so on.

•Follow the procedure above to rename other inputs.

4Press + or –repeatedly to exit the INPUT RENAME mode.

36