Yamaha DSP-AX2 COMPONENT, [A] and [B], ■7A. For the, ■7C. For the, ■7D. For the, 7. I/O ASSIGN, ■ 7B. For the, OPTICAL INPUT, COAXIAL INPUT, 7C OPTICAL IN, 8. INPUT MODE

SET MENU Items

7. I/O ASSIGN

Use this feature to designate the input for the COMPONENT jacks (A and B) and DIGITAL INPUT/OUTPUT jacks (1) to (10)* to any sources you want. Change the setting when there are not enough digital input jacks depending on the source components you are using. (*(10) can be selected for General and China models only.) Initial settings are shown on the display.

■7A. For the	■ 7B. For the	■7C. For the	■7D. For the
COMPONENT	OPTICAL OUTPUT	OPTICAL INPUT	COAXIAL INPUT
VIDEO INPUT jacks	jacks (1) and (2)	jacks (3) to (7)	jacks (8) to (10)*
[A] and [B]

	7A CMPNT-V INPUT			7B OPTICAL OUT				7C OPTICAL IN		7D COAXIAL IN
￿￿ [A]…………		DVD		￿￿ (1)…………MD/TAPE				(3)…………	CD	(8)………… CD
	[B]…………D-TV/LD			(2)………… CD-R				(4)………… CD-R		￿￿(9)………… CABLE	*
							￿￿(5)…………		DVD	(10)……… LD-RF
								(6)…………D-TV/LD
								(7)…………	SAT
	7A CMPNT-V INPT			7B OPTICAL OUT				7C OPTICAL IN		7D COAXIAL IN
	[A]…………	DVD		(1)…………MD/TAPE				(5)…………	DVD	(9)………… CABLE
8. INPUT MODE
8 INPUT MODE					Use this feature to designate the input mode for sources connected to DIGITAL
					INPUT jacks when you turn on this unit.
	>AUTO LAST
			8 INPUT MODE			Select “AUTO” to allow this unit to automatically detect the type of input
			“AUTO	LAST		signal and select the appropriate input mode.
						Select “LAST” to set this unit to automatically select the last input mode used
						for that source.

9. PARAMETER INI (Parameter Initialization)

English

9 PARAM. INI				9	PARAM. INI
					*1	2	3	4
*1	2	3	4
5	6	7	8	9	PARAM. INI
9	10	11	12		5	6	7	8

9 PARAM. INI

9 10 11 12

Use this feature to initialize the parameters for each DSP program within a DSP program group. When you initialize a DSP program group, all of the parameter values within that group revert to their initial settings.

Press the DSP program group button on the remote control for the DSP program you want to initialize.

•All of the DSP programs within the selected program group are initialized. Repeat this step to initialize other DSP program groups.

Notes:

•The asterisk (*) mark next to a DSP program group number indicates that you have changed the parameter values in one or more DSP programs within that group.

•The parameter values of the DSP programs do not change if you initialize a program group that does not have the asterisk (*) mark.

•When the MEMORY GUARD function is set to “ON”, you cannot initialize any program groups.

•You cannot initialize the individual DSP programs within a group separately.

Caution:

•Once you initialize a DSP program group, you cannot have this unit revert the parameter values back to the previous settings automatically.

37