Speciﬁcations | Yamaha DSP1D-EX instruction

K TIME CODE IN connector

This balanced XLR3-31 connector receives SMPTE time code (LTC) for analog input from the external device. The rated input level is –10 dB, and the pin assignment is as follows.

1=ground, 2=hot, 3=cold

L CONSOLE I/O 1, 2 slots

Connect these slots to the DIGITAL I/O CONSOLE jacks of the CS1D control surface to transmit multi- channel digital audio signals. Use a genuine Yamaha half-pitch 68-pin cable for connection.

M CASCADE IN, OUT slots

Use one of these connectors to cascade two DSP1D/ DSP1D-EX units to transmit multi-channel digital audio signals. Use a genuine Yamaha half-pitch 68-pin cable to connect the CASCADE IN (or OUT) to the CASCADE OUT (or IN) of another DSP1D/DSP1D- EX.

These connectors are provided for future system expansion, but they are not operative in the current software version.

N OUTPUT 1–6 slot

Use these slots to connect the INPUT connectors of an analog output unit AO8 series or DIO8 digital I/O unit to output multi-channel digital audio signals from the DSP1D/DSP1D-EX. Use a genuine Yamaha half-pitch 68-pin cable for connection.

O INPUT 1–10 slot

Use these slots to connect the OUTPUT connectors of an analog input unit AI8 series or DIO8 digital I/O unit series to input multi-channel digital audio signals to the DSP1D/DSP1D-EX. Use a genuine Yamaha half-pitch 68-pin cable for connection.

P Ground connector

Be sure to ground the unit to avoid the risk of electrical shock before you insert the power plug into an AC outlet.

This product comes with a 3-pin power cord. If the ground connector of the AC outlet has already been grounded, the unit will be grounded effectively by using the 3-pin power cord.

Grounding the unit is also effective for preventing hum and other noise.