Yamaha DVD-C940 Sound, Preparation, TV System NTSC/PAL Conversion, Digital output, Analog output

Preparation

–Adv. Picture Options (on COMPO- NENT 480p VIDEO OUT only)

●DCDi - can be set to On (Y) or Off (N).

●True Life - produces a more dynamic picture by increasing the picture contrast and the color intensity.

–P-Scan Aspect Ratio (on COMPO- NENT 480p VIDEO OUT only)

No linear stretch: for display of 4:3 image on 16:9 TV with non-linear stretching (center portion of screen is stretch less than the side).

4:3 Pillar box: for display of 4:3 image on 16:9 TV without stretching.

Off: No aspect ration adjustment

– TV System (NTSC/PAL Conversion)

Allows you to select between PAL, NTSC and AUTO mode depending on your TV.

The conversions supported are as follows:

	Disc		Output format
Type		Format	Selected mode
			NTSC	PAL	AUTO
DVD		NTSC	NTSC	PAL60	NTSC
		PAL	Not	PAL	PAL
			Supported
VCD		NTSC	NTSC	PAL60	NTSC
		PAL	NTSC	PAL	PAL

1In the Personal Preferences Menu, select TV System.

2Press 3 or 4 to select PAL, NTSC or AUTO. Notes:

–If you have a PAL only TV, ensure that your TV System setting is PAL.

–AUTO can only be selected when using a TV that supports both the NTSC and PAL systems (multisystems).

–This setting is applicable for CVBS output on cinch only.

–Slight picture distortions may occur due to this conversion. This is normal. Thus, the AUTO format is most suitable for the best picture quality.

Sound

–Digital output

●Digital output selection enables you to specify the type of digital output suitable for your receiver.

●Select ALL (default setting), if you had connected your DIGITAL AUDIO OUT to a multichanel decoder receiver.

●Select PCM only if your receiver is not capable of decoding compressed/encoded input stream.

●Select OFF to deactivate the DIGITAL AUDIO OUT.

Note:

–Digital output is not available for SACD and MP3 discs.

1en	1en	1	2
Digital output		Off
Analog output		PCM only
Night mode		All

– Analog output

Select Stereo, Dolby Surround-compatible, 3D Sound or Multi-channel. Factory setting is Multi- channel.

Multi-channel: Select this setting when using a multi-channel audio/(video) receiver with 6 channel inputs. In this mode, the player will perform DTS decoding or Dolby Digital 5.1- channel decoding when applicable, and Dolby Pro Logic decoding on DVD-Video and Video-CD discs with 2-channel sound tracks. No Dolby Pro Logic decoding is done with (Super) Audio CD discs.

Stereo: In this setting, the 5.1 audio channels are down-mixed to a stereo signal. Select this setting when connecting to a TV, stereo amplifier/ receiver, etc.

English

13