Yamaha DVD-C940 Preparation, Speaker settings, Channel settings Front speaker, Center Speaker

– Speaker settings

Allows you to select speaker settings, volume balance and delay time, and to test the speaker settings.

Speaker settings are only active on the Multi- Channel Audio Out outputs for both DVD and SACD. Speaker settings will not be used during playback in the SACD Stereo mode.

Speakers Settings

Front L R

Center

Surround L

Surround R

Sub woofer

Press OK to Exit

Notes:

–Volume level setting and delay time are not applicable for SACD playback.

–To preserve highest sound quality for playback of multichannel SACD, bass filter for speakers will only be activated when ALL speakers are set to small in speaker setting.

6 Channel settings Front speaker

L (Large):	When the front speakers can
	reproduce low frequency signals
	below 120Hz
S (Small):	When the front speakers cannot
	produce low frequency signals
	below 120Hz

				Preparation
Center Speaker
L (Large):		When the center speaker can
		reproduce low frequency signals
		below 120Hz
S (Small):		When the center speaker cannot
		produce low frequency signals
		below 120Hz
Off:		When the center speaker is not
		connected
Surround speakers
L (Large):		When the surround speakers can
		reproduce low frequency signals
		below 120Hz
S (Small):		When the surround speakers
		cannot produce low frequency
		signals below 120Hz
Off:		When the surround speakers are
		not connected
Subwoofer
On:		When you connect a subwoofer
Off:		When a subwoofer is not
		connected
		MAIN CENTER			MAIN
		LEFT			RIGHT
					1
					1
		0°			0
					1
		3			-
					°
					2
					0
					°
			Reference
			listening
			position
	LEFT				RIGHT
	SURROUND				SURROUND
		SUBWOOFER

English

15