32
Setup Menu
COLOR
Increase the value to enhance the color in
your picture or vice versa. Zero (0) is the
average color setting value.
5Press 1 2 to adjust the setting that best
suits your personal preference.
6Repeat steps 4–5 to adjust other color
features.
7Press ENTER/OK to confirm.
Adv. picture settings
This player allows you to fine-tune the
following video parameters.
We recommend setting the aspect ratio
on your TV if the function is available.
1In ‘VIDEO SETUP PAGE’, press 34 to
highlight [ADV PICTURE], then press 2.
2Press 34 to highlight an option.
3Enter a submenu by pressing 2.
4Move the cursor by pressing 34 to
highlight the selected item.
DCDi
DCDi (Directional Correction
Deinterlacing) computes and tracks the
angle of the screen edge to fill in the
missing pixel on the TV screen. DCDi will
optimize the image quality significantly,
especially during the slow motion playback.
This function is available for progressive
scan output only.
OFF
Select to deactivate this function.
ON
Select to activate this function.
GAMMA
Enables you to adjust the intensity of the
picture non-linearly. A positive value
enables you to bring out low level detail in
dark scenes, while a negative value
emphasizes contrast. This function is not
available when using an HDMI-compatible
component.
-7 to +7
CHROMMA DELAY
The chroma (color) and luminance
(brightness) signals are not synchronized.
The Chroma Delay setting allows you to
adjust the advance delay of the chroma
signal to yield a perfectly clear picture. This
function is not available when using an
HDMI-compatible component.
-3 to +3
PSCAN FORMAT
Set the aspect ratio of the projected
images on the screen. This function is only
available for progressive scan and HDMI
video output.
NL_STRETCH
Select to display 4:3 image on the 16:9
screen without stretching.
4:3 PILLAR BOX
Select for display of 4:3 image on the 16:9
screen with non-linear stretching (Center
position of screen is stretched less than
the side).
OFF
No aspect ratio adjustment is made when
this option is selected.
TIPS: To return to the previous menu, press 1.
To clear the menu, press SETUP.