Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center.
Problem
No power
No picture
Distorted picture
Completely distorted picture or black/white picture with
DVD
No sound or distorted sound
No audio at digital output
No sound and picture
Disc can’t be played
Picture freezes momentarily during playback
Solution
–Check if the AC power cord is properly connected.
–Press the STANDBY/ON on the front of the DVD system to turn on the power.
–Refer to your TV’s manual for correct Video In selection. Change the TV input until you see the DVD screen.
–Check if the TV is switched on.
–Sometimes a small amount of picture distortion may appear depending on the disc being played back. This is not a malfunction.
–Make sure the disc is compatible with the DVD Player.
–Ensure that the DVD Player’s TV Type is set to match that of the disc and your TV.
–Adjust the volume.
–Check that the speakers are connected correctly.
–Check the digital connections.
–Check if your receiver can decode
PCM ONLY.
–Check if the audio format of the selected audio language matches your receiver capabilities.
–Check that the RGB/SCART cable is connected to the correct device (See “Video Connections”).
–The
–Ensure the disc label is facing up.
–Check if the disc is defective by trying another disc.
–If you have recorded a Picture CD or MP3 CD yourself, ensure that your disc contains at least 10 pictures or 5 MP3 tracks.
–Region code incorrect.
–Check the disc for fingerprints/scratches and clean with a soft cloth wiping from centre to edge.
28
