Getting Started
Step 2: Turning on the power
1Connect the AC power cord to the power outlet.
2Turn on your TV and AV receiver.
3Select the appropriate input source of the AV receiver connected to this unit. Refer to the manual supplied with your AV receiver for details.
4Turn on this unit.
5Set the TV to the correct Video IN channel (e.g. EXT1, EXT2, AV1, AV2, AUDIO/ VIDEO, etc. Refer to the manual supplied with your TV for details).
➜The front panel display lights up and the default screen appears on the TV.
Step 3: Setting a TV type and display
Setting a color system for your
TV
This unit is compatible with both NTSC and PAL video formats. Select the color system that matches your TV.
VIDEO SETUP PAGE |
|
TV TYPE | PAL |
TV DISPLAY | NTSC |
PROGRESSIVE | MULTI |
PICTURE SETTING |
|
BLACK LEVEL |
|
CLOSED CAPTION |
|
HDMI SETUP |
|
1Press SETUP.
2Press 2 repeatedly to select “VIDEO SETUP PAGE”.
3Press 3 /4 to highlight [TV TYPE], and then press 2.
4Press 3/4 to highlight one of the following options.
PAL
Select this if the connected TV is a PAL system TV. It will change the video signals of NTSC discs and output them in PAL format.
NTSC
Select this if the connected TV is an NTSC system TV. It will change the video signals of PAL discs and output them in NTSC format.
MULTI
Select this if the connected TV is compatible with both NTSC and PAL formats (such as a
5Select an item, and then press ENTER/OK to confirm your selection.
Notes:
–Before changing the current TV standard setting, ensure that your TV supports the selected TV type.
–If the picture is not displayed properly on your TV, wait for 15 seconds for this unit to activate automatic recovery.
–When making HDMI connections, you cannot change or select [TV TYPE].
CHANGING NTSC TO PAL:
1.ENSURE THAT YOUR TV SUPPORTS PAL STANDARD.
2.IF THERE IS A DISTORTED PICTURE DISPLAYED ON THE TV, WAIT 15 SECONDS FOR AUTO RECOVER.
OKCANCEL
English
TIPS: To return to the previous menu, press 1.
To exit from the menu, press SETUP.
11 En