Setup Menu

VIRTUAL SURR

Select this to virtually reproduce the surround channels.

2Press 3 /4 to select a setting, and then press ENTER/OK to confirm your selection.

Setting the digital output

The [DIGITAL AUDIO] options are: “DIGITAL OUTPUT” and “LPCM OUTPUT”.

1In “AUDIO SETUP PAGE”, press 3 /4 to highlight [DIGITAL AUDIO], and then press 2.

2Press 3 /4 to highlight an option.

3Press 2 to enter a submenu.

DIGITAL OUTPUT

Set the digital output according to your optional audio component connections.

OFF

Select this to turn off the digital output.

ALL

Select this if you have connected the digital audio output jack to a multi-channel decoder/receiver.

PCM ONLY

Select this only if your receiver is not capable of decoding multi-channel audio signals.

LPCM OUTPUT

Select this if you have connected this unit to a PCM-compatible receiver via a digital terminal, such as the coaxial terminal. In this case, you may need to adjust “LPCM OUTPUT”.

Discs are recorded at a certain sampling rate. The higher the sampling rate, the better the sound quality.

48KHz

Select this to play back discs recorded at the sampling rate of 48 kHz. All 96 kHz PCM data streams (if available) are converted to the sampling rate of 48 kHz.

96KHz

Select this to play back discs recorded at the sampling rate of 96 kHz. If the 96 kHz disc is copy protected, the digital output is automatically converted to the sampling rate of 48 kHz.

4Press 3 /4 to select a setting, and then press ENTER/OK to confirm your selection.

English

TIPS: To return to the previous menu, press 1.

To exit from the menu, press SETUP.

25 En