Connections
General notes on connections
Be sure to turn off this unit and unplug the power cable before you make or change connections.
•Depending on the component you want to connect, there are various ways to make connections. Possible connections are described below.
•Refer to the manuals supplied with your other components as necessary to make the best connections.
•Do not connect this unit via your VCR. The video quality could be distorted by the copy protection system.
•Do not connect the audio out jack of this unit to the phono in jack of your audio system.
Audio connections
Digital connection
This unit has a digital coaxial output jack. Connect the DIGITAL OUT - COAXIAL jack of this unit to your AV receiver equipped with a Dolby Digital, DTS, or MPEG decoder using a commercially available coaxial cable.
PR | COMPONENT Y | VIDEO | |
COAXIAL | PB | S VIDEO | |
AUDIO OUT DIGITALOUT | VIDEO OUT | ||
This unit
C
C
AV receiver
Speakers
Notes
•You need to set [DIGITAL OUTPUT] to [ALL] (see “DIGITAL OUTPUT” on page 25).
•If the audio format of the digital output does not match the capabilities of your receiver, the receiver produces a distorted sound or no sound at all. Make sure to select the appropriate audio format from the menu screen on the disc. Pressing AUDIO on the remote control once or more may change not only the audio languages but also the audio format. The selected format appears in the front panel display for several seconds.
•If you want to enjoy Dolby Digital, DTS and MPEG formats, you must connect this unit to an AV receiver that supports these formats.
Analog connection
This unit has
PR | COMPONENT Y | VIDEO | |
COAXIAL | PB | S VIDEO | |
AUDIO OUT DIGITALOUT | VIDEO OUT | ||
This unit
L R
Audio pin cable (supplied)
L R
Stereo
amplifier
LR
Speakers
8En