Yamaha DVD-S661BL Turning the HDMI audio on/off, Turning the night mode on/off

Setup Menu

48KHz

Select this to play back discs recorded at the sampling rate of 48 kHz. All 96 kHz PCM data streams (if available) are converted to the sampling rate of 48 kHz.

96KHz

Select this to play back discs recorded at the sampling rate of 96 kHz. If the 96 kHz disc is copy protected, the digital output is automatically converted to the sampling rate of 48 kHz.

4Press 5/a to select a setting, and then press ENTER.

Turning the HDMI audio on/off

When you connect this unit to an HDMI compatible component via the HDMI jack, select to turn on or off the HDMI audio output.

1In “AUDIO SETUP PAGE”, press 5/a to highlight [HDMI AUDIO], and then press 3.

ON

Select this to turn on the HDMI audio output.

OFF

Select this to turn off the HDMI audio output.

Notes

•If you are not using the HDMI audio output, set this to [OFF].

•If the monitor/receiver connected to this unit using HDMI does not support HDMI audio signal input, set this to [OFF].

•This unit can output the following audio signals using HDMI: 32/44.1/48 kHz, 2ch linear PCM signals and bitstream signals (Dolby Digital, DTS and MPEG).

•When audio signals are being output by HDMI- compatible components, digital output signals are muted.

•When [DIGITAL OUTPUT] is set to [OFF] on this unit, HDMI audio is muted even if [HDMI AUDIO] is set to [ON] and an HDMI connection is established between the monitor and receiver.

•When [DIGITAL OUTPUT] is set to [ALL] on this unit, PCM signals are still output if the monitor and receiver only support the PCM format. However, the audio output is muted when audio format plays back the DTS source.

Turning the night mode on/off

In the night mode, high volume output is softened and low volume output is brought upward to an audible level. It is useful when you want to watch your favorite action movie without disturbing others at night.

1In “AUDIO SETUP PAGE”, press 5/a to highlight [NIGHT MODE], and then press 3.

ON

Select this to level out the volume. This feature is only available for movies with the Dolby Digital mode.

OFF

Select this when you want to enjoy the full dynamic range of surround sound.

2Press 5/a to select a setting, and then press ENTER.

26En