Yamaha DVX-C300, NX-C300, NX-S300 Volume Control and Other Functions, Setting remote control codes

Volume Control and Other Functions

Adjusting the volume level

Use theVOLUME control (or press VOL (+/-)

on the remote control) to increase or decrease the volume level.

-3' _ uL , ,_,_ is the minimum volume level and

....,uLn'H_,, is the maximum volume level.

To mute the volume temporarily

Press MUTE on the remote control.

") Playback will continue without sound and "I'IUT £" appears.

") To restore the volume, press MUTE again or

increase/decrease the volume level.

Setting remote control codes

Once you set the appropriate remote control codes, you can use this remote to control your

other components.The remote control

automatically switches to the appropriate control mode for that component.

@@@;Numeric

@@®J

_ -- keypad (0-9)

i\'J_

Switching to active mode

•Press TUNER repeatedly on the remote control

to select the appropriate active mode.

Each time you press TUNER, the front display changes as follows;

TUNER/FH

TUNER/AN

•Press AUX repeatedly on the remote control to

select the appropriate active mode.

Each time you press AUX, the fi'ont display changes as follows;

AUX/ANALOG

AUX/DIGITAL

O® ,,_®®

Tci?°,':4,Y

@

TV- _ -- AUX

For the TV button you can set aTV remote control code and for the AUX button you can set a cable or satellite tuner remote control code.

Press and hold TV or AUX.

Press PROG, then release both keys.

Press the numeric keypad (0~9) to enter the 4

digit remote control codes (see "Remote Control Codes" at the end of this manual).

Press PROG again to store.

Switching to eco power

standby mode

•Press STANDBY/ON on the front panel or

POWER ((b/I) on the remote control. -_The display screen goes blank.

38