22 EMX5014C Owner’s Manual
Front & Rear Panels
Reference
Digital Effects Section ISEND Jack
• EFF
This unbalanced phone output jack outputs the signal
from the EFFECT bus. You use this jack, for example,
to connect to an external effector. You can then return
the signal by connecting the external effector to any of
the LINE jacks on channel pairs 7/8 to 13/14.
If you are returning a signal from an external effector
into a LINE jack on any channel pair 7/8 to 13/14,
please be sure to turn the EFFECT knob for that
channel pair to “0”.
• AUX1, AUX2
These unbalanced phone jack outputs monaural moni-
tor signals from the AUX1 and AUX2 buses, respec-
tively. You use these jacks, for example, to connect to
an effector or to a cue box or other such monitoring
system.
JPROGRAM Dial
Selects the type of effect to be used. You can select
from 16 different effect types, as follows.
KPARAMETER Control
Adjusts the parameter (depth, speed, etc.) associated
with the selected effect type.
The mixer saves the last value used with each effect
type. When you change to a different effect type, the
mixer automatically restores the value that was previ-
ously used with that type (regardless of the current
position of the PARAMETER knob). But note that all
values return to their defaults at power-off.
LAUX1/2 Controls
Each knob adjusts the level of the effected sound into
the corresponding AUX1 and AUX2 buses.

I

J

L

K

O

N

M

No. Program Parameter
1REVERB HALL 1 REVERB TIME
2REVERB HALL 2 REVERB TIME
3REVERB ROOM 1 REVERB TIME
4REVERB ROOM 2 REVERB TIME
55
55 REVERB STAGE 1 REVERB TIME
66
66 REVERB STAGE 2 REVERB TIME
77
77 REVERB PLATE REVERB TIME
88
88 DRUM AMBIENCE REVERB TIME
9KARAOKE ECHO DELAY TIME
0VOCAL ECHO DELAY TIME
ACHORUS 1 LFO FREQ
BCHORUS 2 LFO FREQ
CC
CC FLANGER LFO FREQ
DD
DD PHASER LFO FREQ
EE
EE AUTO WAH LFO FREQ
FF
FF DISTORTION DRIVE
NOTE