Operation
ZMU02689
4.Close the fuel cock.
ZMU02660
5.Tilt support bar equipped models: Hold the rear of the top cowling or the rear handle (if equipped) with one hand and tilt the outboard motor up fully until the tilt support bar automatically locks.
ZMU02694
6.Tilt support knob equipped models: Hold the rear of the top cowling with one hand, fully tilt the outboard motor up, and push the tilt support knob into the clamp bracket.
7.Tilt support lever equipped models: Hold the rear handle and tilt the engine up ful- ly until the tilt support lever automatically locks.
NOTE:
Tilt support lever/bar equipped models: If the motor is not facing forward, the tilt support le- ver/bar cannot automatically turn to the locked position. If the tilt support lever/bar does not automatically lock, swing the motor a little to the left and right.
EMU28031
Procedure for tilting down (manual tilt models)1.Slightly tilt the outboard motor up.
2.If the tilt support bar equipped: Slowly tilt the outboard motor down while pulling the tilt support bar lever up.
31