Operation
EMU28101
Procedure
1.Place the gear shift lever in neutral and face the outboard motor forward.
N
ZMU02682
2.Slightly tilt the outboard motor up until the tilt support bar automatically turns to the lock position to support the engine.
ZMU04542
3.To lower the outboard motor to the nor- mal running position, first slightly tilt the outboard motor up. Then pull up the tilt support bar lever and slowly tilt the en- gine down.
ZMU02673
NOTE:
The outboard motor is equipped with 2 or 3 positions for shallow water cruising.
EMU28190
Cruising in other conditions
Cruising in salt water
After operating in salt water, wash out the cooling water passages with fresh water to prevent them from becoming clogged with salt deposits.
NOTE:
For cooling system flushing instructions, see page 35.
Cruising in turbid water
Yamaha strongly recommends that you use the optional
33