
Maintenance
2.Spray the outboard motor exterior with “Yamaha Silicone Protectant” (Part No.
ECM01330
CAUTION:
If equipped Electronic Fuel Injection: Do not spray when the engine is running. Al- so, do not spray near the silencer and oxygen sensor cover or into the engine. Otherwise the oxygen sensor for Electronic Fuel Injection system could be damaged.
3.Wax the cowling with a
(Part No.
EMU28450
Cleaning the outboard motor
After use, wash the exterior of the outboard motor with fresh water. Flush the cooling system with fresh water.
ZMU02703
NOTE:
For cooling system flushing instructions, see page 35.
EMU28460
Checking painted surface of motor
Check the motor for scratches, nicks, or flaking paint. Areas with damaged paint are more likely to corrode. If necessary, clean and paint the areas. A
EMU28483
Periodic maintenance
EWM01070
WARNING
Be sure to turn off the engine when you perform maintenance unless otherwise specified. If you or the owner is not familiar with machine servicing, this work should be done by your Yamaha dealer or other qualified mechanic.
Maintenance, replacement, or repair of the emission control devices and systems may be performed by any marine engine repair establishment or individual. All warranty repairs, however, including those to the emission control system, must be performed by an authorized Yamaha marine dealership.
A service manual is available for purchase through your Yamaha dealer for owners who have the mechanical skills, tools, and other equipment necessary to perform maintenance not covered by this owner’s manual.
EMU28510
Replacement parts
If replacement parts are necessary, use only genuine Yamaha parts or parts of the same type and of equivalent strength and materi- als. Any part of inferior quality may malfunc- tion, and the resulting loss of control could endanger the operator and passengers. Yamaha genuine parts and accessories are available from your Yamaha dealer.
38