Yamaha EMX-220VCD Automatic preset tuning, Memory back-up, To recall a preset station, When the automatic preset tuning is completed;

TUNING OPERATION

1

VIDEO CD CHANGER RECEIVER								A/B/C/D/E	PRESET/TUNING/BAND
		VIDEO CD				OPEN/CLOSE	DISC
							CHANGE
						DISC 1	DISC 2	DISC 3
PROGRAM						INPUT SELECTOR		VOLUME
						VCD/CD	TUNER
STANDBY/ON
ECHO	MUSIC	ECHO
						VCR•LD/TV•VCD/CD•TAPE/MD•TUNER
KARAOKE		MEMORY
PHONES						MIC TONE		MIC	MIC MIXING
		DISPLAY	MEMORY AUTO/MAN’L	REPEAT	TIME	INPUT TRIM

2

		VCD/CD TUNER
	1	2	3	4	5
	1	2	3	4	5
	6	7	8	PRESET
	6	7	8	9	0
	A	B	C	D	E
1	TIME	PROG			+I0
	MODE	INDEX		RANDOM	OPEN/CLOSE
	DISC SKIP	PREV	NEXT	RETURN	SELECT
	VCD/CD	TUNER		STOP	PLAY/PAUSE
	CENTER/REAR			INPUT
		TEST	MUSIC	TIME INDEX
	/DELAY
	ECHO/KEY		PROGRAM	INTRO	DIGEST
	LEVEL
	SLEEP	STANDBY/ON			KARAOKE

VOLUME

Memory back-up

The memory back-up circuit prevents the programmed data from being lost even if the AC supply lead is disconnected from the AC outlet or the power is cut due to temporary power failure. If, however, the power is cut for more than one week, the memory may be erased. If so, it can be re-programmed by simply following the preset tuning steps.

Automatic preset tuning

You can make use of an automatic preset tuning function. With this function, this unit performs automatic tuning and stores stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on the previous page.

1 Select the tuner by pressing the TUNER INPUT SELECTOR button so that “TUNER” appears on the display.

2 Press and hold the tuner MEMORY button for more than 2 seconds.

* The MEMORY and AUTO indicators flash.

This unit performs automatic tuning and searches FM and AM stations in that order. Received stations are programmed to A1, A2 ... A8 sequentially.

When the automatic preset tuning is completed;

The display shows the frequencies of the first preset station (stored to A1).

Check the contents and the number of preset stations by following the procedure of the section “To recall a preset station” on the previous page.

To recall a preset station

Simply follow the procedure of the section “To recall a preset station” on the previous page.

Notes

•The automatic preset tuning search will be performed through all frequencies until 40 stations are stored. If the number of received stations is less than 40, the search will stop after searching all frequencies.

*Since FM stations are searched for first, there may be a case that 40 preset stations are occupied by FM stations only.

•With this function, only stations with sufficient signal strength are stored automatically. If the station you want to program is weak in signal strength, tune in to it with the Manual tuning method (in monaural) and program it by following the procedure of the section “To store stations” on the previous page.

•You can replace a preset station with another FM or AM station manually by simply following the procedure of the section “To store stations” on the previous page.

E-32