Yamaha EMX-220VCD Sleep timer operation, Using the timer and the sleep timer at the same time, SLEEP, STANDBY/ON, STANDBY/ON, OFF SLEEP ↑, To change the sleep time

Play the desired sound source.

HOW TO USE THE BUILT-IN TIMER

VIDEO CD CHANGER RECEIVER								A/B/C/D/E	PRESET/TUNING/BAND
		VIDEO CD				OPEN/CLOSE	DISC
							CHANGE
						DISC 1	DISC 2	DISC 3
PROGRAM						INPUT SELECTOR		VOLUME
						VCD/CD	TUNER
STANDBY/ON
ECHO	MUSIC	ECHO
						VCR•LD/TV•VCD/CD•TAPE/MD•TUNER
KARAOKE		MEMORY
PHONES						MIC TONE		MIC	MIC MIXING
		DISPLAY	MEMORY AUTO/MAN’L	REPEAT	TIME	INPUT TRIM

STANDBY/ON

		VCD/CD TUNER
	1	2	3	4	5
	1	2	3	4	5
	6	7	8	PRESET
	6	7	8	9	0
	A	B	C	D	E
	TIME	PROG			+I0
	MODE	INDEX		RANDOM	OPEN/CLOSE
	DISC SKIP	PREV	NEXT	RETURN	SELECT
	VCD/CD	TUNER		STOP	PLAY/PAUSE
	CENTER/REAR			INPUT
		TEST	MUSIC	TIME INDEX
	/DELAY
	ECHO/KEY		PROGRAM	INTRO	DIGEST
	LEVEL
SLEEP	SLEEP	STANDBY/ON			KARAOKE

VOLUME

STANDBY/ON

Sleep timer operationThis unit can be turned into the standby mode automatically.

1

2 Press the SLEEP button. “SLEEP” appears on the display, and soon it is replaced by “2h00m”.

3 Press the SLEEP button repeatedly until the desired sleep

time appears on the display. The display will change as described below. [Time is displayed by the hour (h) and the minute (m).]

2h00m	↑	1h30m ↑ 1h00m		↑	0h30m
↑			OFF SLEEP ↑
		(Sleep timer is off.)

*The original display mode will resume about 4 seconds after the selection is made.

*The SLEEP indicator will light up to indicate that the sleep timer is on.

4 The unit will turn into the standby mode automatically when the selected sleep time passes.

To confirm the sleep time setting

Press the SLEEP button once. “SLEEP” appears on the display, and soon it is replaced by the remaining time of the selected sleep time.

To change the sleep time

While the SLEEP indicator is illuminated, press the SLEEP button repeatedly until the desired time appears.

To stop the sleep timer operation

Press the STANDBY/ON switch, or press the SLEEP button repeatedly until “OFF SLEEP” appears on the display. (The SLEEP indicator will go out.)

Using the timer and the sleep timer at the same time

You can make a timer play setting so that the timer operates after this unit turns into the standby mode by the operation of the sleep timer.

1 Prepare timer play. (See pages 44 to 45)

*After the timer play setting is made, press the STANDBY/ON switch to turn on this unit.

2 Press the SLEEP button and set the sleep time.

When the sleep timer operation finishes, the timer begins functioning to turn the source on at the preset time.

Note

You cannot use the timer and the sleep timer at the same time in any way other than described here.

E-46