Yamaha EMX5016CF c, d, c, k, i, e, f, g, h, e f g h j l, d

26 EMX5016CF Owner’s Manual

Front & Rear Panels

Reference

cPHANTOM Switch and Indicator

This switch toggles phantom power on and off. The

indicator lights up when the setting is on. If you set the

switch on, the mixer supplies power to the XLR mic

input jacks on all channels (the INPUT A jacks on

channels 1 to 8, and the MIC jacks on channel pairs

9/10 to 15/16). Set this switch on when using one or

more condenser microphones.

When the switch is on, the mixer supplies DC +48V

power to pins 2 and 3 of all XLR input jacks.

•Be sure to leave this switch off if you do not need

phantom power.

•When using phantom power, do not connect any

devices other than condenser microphones to the

XLR input jacks. Other devices may be damaged

if connected to phantom power. This precaution

does not apply to balanced dynamic microphones,

however, as these will not be affected by phantom

power.

•To avoid damage to speakers, be sure to turn off

the power to the EMX itself and to any other

power ampliﬁers and power speakers before

switching phantom power on or off. We also rec-

ommend that you turn all output controls (channel

faders, ST Master fader, AUX1/2 faders, etc.) to

minimum settings before operating the switch, to

avoid risk of loud noises that could cause hearing

loss or device damage.

dLEVEL Meters

If the ST/AFL-PFL switch e is set to ST, these meters

show the L and R levels of the signal output from the

ST OUT jacks R. If the ST/AFL-PFL switch is set to

AFL-PFL, the meters show the levels output from the

PHONES jack S.

Note that the signal output to the ST OUT jacks is

also passed through the internal ampliﬁer and then

output at the SPEAKERS jacks m. Keep an eye on

the LIMITER lamps ] to ensure that the level at the

SPEAKERS jacks does not stay too high.

eST/AFL-PFL Switch

If the switch is set to AFL-PFL ( ), the LEVEL

meters show the level of the output at the PHONES

jack prior to adjustment by the PHONES control. If the

switch is set to ST ( ), the meters show the level

output at the ST OUT jacks following adjustment by

the ST master fader.

The PFL (F, M, i) and AFL j switches select the

mix to be monitored at the PHONES jack.

fPHONES Control

Controls the level of the signal output to the PHONES

jack.

gST SUB OUT Control

Adjusts the signal level to the ST SUB OUT jacks.

Has no effect on the output from the ST OUT and

SPEAKERS jacks.

hSTANDBY Switch

This switch mutes the input to channels 1 to 8. The

switch lights up to indicate that the mute has been

turned on. Note that the mute does not work on chan-

nels 9/10 to 15/16.

When using the mixer for live performances, you can

ﬁll in gaps in the performance by turning on the

STANDBY switch and feeding background music

from a CD player or other such device into channels

9/10 to 15/16.

iefghjldkc

NOTE

CAUTION

NOTE