Yamaha EMX5016CF Digital Effects Section

22 EMX5016CF Owner’s Manual

Front & Rear Panels

Reference

Digital Effects Section HSEND Jacks

•EFF1, EFF2

These unbalanced phone output jacks output the signal

from the EFFECT1/2 buses. You use these jacks, for

example, to connect to an external effector. You can

then return the signal by connecting the external effec-

tor to any of the LINE jacks on channel pairs 9/10 to

15/16.

If you are returning a signal from an external effector

into a LINE jack on any channel pair 9/10 to 15/16,

please be sure to turn the EFF1/2 knob for that chan-

nel pair to “0”.

•AUX1, AUX2

These unbalanced phone jacks output monaural monitor

signals from the AUX1 and AUX2 buses, respectively.

You use these jacks, for example, to connect to an effec-

tor or to a cue box or other such monitoring system.

IPROGRAM Dials

These let you select the type of effect from 16 different

types for EFFECT 1 and EFFECT 2. For details on

each of the effect types, refer to page 37.

JPARAMETER Knobs

Each knob adjust the parameter (depth, speed, etc.)

associated with the selected effect type.

The mixer saves the last value used with each effect

type. When you change to a different effect type, the

mixer automatically restores the value that was previ-

ously used with that type (regardless of the current

position of the PARAMETER knob).

KAUX1/2 Knobs

Each knob adjusts the level of the effected sound into

the corresponding AUX1 and AUX2 buses.

LEFF1/2 ON Switches/Indicators

Switches use of the internal effect on or off. The inter-

nal effect is applied only if this switch is turned on. To

set the switch on, press it in so that it lights up.

As an alternative to the ON switch, you can use a sepa-

rately sold FC5 foot switch to toggle the effector on

and off.

The On/Off status of the internal effects will be

retained, even when you turn off the mixer's power.

MPFL (Pre-Fader Listen) Switches

Set this switch on to feed the signal from the internal

digital effect signal (pre the EFF1/2 RTN faders) into

the PFL bus, so that it can be monitored at the

PHONES jack.

• The signal will not feed into the PFL bus if the

effect’s ON switch is turned off.

• The PFL (F, M, i) and AFL j switches select

the mix to be monitored at the PHONES jack. If

the channel’s PFL or AFL switch is ON, the chan-

nel’s output is mixed into the monitor signal to the

PHONES jack. If both switches are OFF, the chan-

nel output is not fed to the PHONES jack.

NEFF1/2 RTN Faders

Adjusts the level of the effected sound into the Stereo

bus.

CAUTION

NOTE