11
Power Supply

The Electric Violin requires power when it is operated in the Controlled Mode, or with a pair of

headphones. Power is supplied by a single 6F22 (S-006P) 9V battery.

Before preparing the power supply, make sure that the Control Section’s LINE OUT and

PHONES jacks are disconnected.

* The Electric Violin operates without power in the Direct Mode.
Bij dit produkt zijn batterijen geleverd.
Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA.
When battery power is depleted, volume will be reduced or the sound will become distorted. In that case,
please take careful note of the following precautions and replace the battery. For information average
battery life, refer to the specifications section on page 15.
•Always follow the +/– signs when inserting the battery. Improper insertion may result in fire.
•To prevent possible damage to the unit due to battery leakage and unnecessary power drain, remove
the battery from the unit when it is not going to be used for an extended period of time.
1
Open the battery case, located on the backside of the instrument, by pushing on the tab labeled
“OPEN” and lifting open the battery compartment cover.
2
Connect the supplied 9V battery (6F22:006P) to the battery snap. Take careful note of the polarity
markings (+/-) as shown in the illustration.
Also, insert the battery at an angle and set so that it is positioned under the hook that holds the
battery in place. (Refer to the illustration below.)
* If the battery is inserted with force onto the hook, it may result in damage to the hook, etc.
3
Place the battery in the battery compartment then close the battery compartment cover.
6F22 (S-006P)
9V battery
battery compartment cover Hook holds battery
in place.
2-EV204/205_E/R1 06.4.3, 2:04 PM11